Need Help With Metal Pad (wiring problem)

Kuri^2

I bought a metal pad off ebay a while back and tbe guy who sold it to me no longer has an account so I couldn't get ahold on him (suspicious....maybe.) That's why I'm comming to you guys now.

A month or two ago I cracked the little black box that came with it, I thought there would be some kind of chipset or somthing but it was just wires connected to two buttons on top so I thought no damage could have been done and I duct-taped it back up. Worked fine for a week or two, then I took it to a party, and I couldn't get it to work at all. Me and someone else at the party took it apart and found the some of the wires had been ripped off the serial port. I was messing with it for a while trying to soder them on right but it never worked. I don't exactly know what brand or make it is, but here's a diagram I made up (my webcam isn't working or I would've taken a picture.)

If anyone has this same kind of metal pad with the start and select buttons on a little black box, could you please tell me how it is wired so I can get it working again? Thanks.

Kuri^2 · Posted: Thu Aug 14, 2003 9:39 pm Post subject:

bump...

anyone?

Please, the pad works fine except for this stupid box. It just sits there mocking me.... =/
_________________

- Death By Intelect -

Orion87 · Trick Member Joined: 11 Aug 2003

i dont know maybe u can try rewiring into a ps1 controller.. seriously ont listen to me im stupid. ask someone with more experience. like ps2freak or someone.

Kuri^2 · Posted: Sat Aug 23, 2003 4:45 pm Post subject:

bump again..... please, anyone with a metal pad and a converter box please just tell me how they are wired from serial to PS2...
_________________

- Death By Intelect -