CB Panel Combatibility

jjang1993 · Trick Member Joined: 05 Aug 2005

Will CB panels replace a TX-1000-2000s panels? and if u buy the panels only will they have the sheet metal on the bottom?
_________________

My Favorite DDR Song is So Deep.

jjang1993 · Trick Member Joined: 05 Aug 2005

can someone please tell me? oh and will the RO Metal pad panels work too? i really need someones help i cant afford a CB or RO AB, so im gonna buy a TX-1000 and mod it cause my soft pad is dying
_________________

My Favorite DDR Song is So Deep.

deM' · Trick Member Joined: 10 Apr 2005 Location: Southington CT

dont bump a thread thats not even a day old.

All arrow panels are theoretically the same size, 11x11" but some might be a tad smaller, thicker, thiner, etc. And panel you buy to replace the tx's will be made of pretty much the same material, and probably wont do anygood. Buy the pad, if a arrow cracks, then replace it... it's not that big of a deal

koofu · Trick Member Joined: 04 Aug 2005

when you buy the panel, as dem0nic posted, it is about 11"x11" but depending on manufactures, as they sometimes will not fit correctly, if it is too small, then there will be cracks, and if you play with socks or barefoot then it will jam your skin >=[. If it is a bit too big, then it will bend the panel face upwards, forming a dome kind of shape on the pad and that wouldn't look nor feel too good either. Every panel should come with a sensor on foam padding underneath it. All you need to do really, is just solder the wires together, place it in the pad, and screw on the fasteners and it should work fine.
_________________

Patty cake, patty cake, microwave
These suckas make a square, damn I'm paid
I'm so cool, but I'm so hot, and I'm, I'm so fly, and you, you're so not