Any masters can help me out?????????????

zrultima · Basic Member Joined: 26 Jul 2005 Location: Florida

Well here it I bought a dance pad a metal dance pad about two months ago and it seems that my bottom arrow does not work at all. I already disarmed the bottom to see if the problem was that the aliminum foil was not touching the sensor anyways i know that not it. What can be wrong can it be the wires or the sensor can anybody help me no one i talk to sooo far has a clue of what to do!! Please email me or write back if u can help me or u can give me some helpful websites. Thanks to anyone that can help

willburz · Posted: Mon Aug 08, 2005 2:13 pm Post subject:

What kind of a pad is it?
_________________

zrultima · Basic Member Joined: 26 Jul 2005 Location: Florida

ita tx-2000 willburz

willburz · Posted: Mon Aug 08, 2005 2:20 pm Post subject:

Well, I think that's your first problem.. I've heard very bad things about TX's. But about the arrow, you should try either cleaning it or replacing the sensor. But I'm not much of an expert at that. That's just my guess.
_________________

zrultima · Basic Member Joined: 26 Jul 2005 Location: Florida

well i did clean it and where can i buy a new sensor??????? and Tx's are good they last ok not the best but good enough

zrultima · Basic Member Joined: 26 Jul 2005 Location: Florida

Any other suggestion anyone??????????????

iwrestledamudkiponce · Trick Member Joined: 22 Mar 2005 Location: California

you could try asking here
_________________

MOOOOOOOOOSE!

Wakka Lakka · Trick Member Joined: 12 Mar 2005

This thread is going to be locked as soon as the mods fight their way through the throng of groupies, but I would suggest heading over to the Bemani Hardware thread and reading up on your pad. There is a known manufacturing defect where the wires are placed in such a way they can be severed by stepping on the arrow

That particular forum also has pictures of the problem and a fix for it. Don't start a new thread there because there is already a TX-2000 sticky and the mods will lock your thread faster than I fail PSMO.

Phrekwenci · Administrator Joined: 27 Feb 2002 Location: New York, NY

Not as fast as expected, but locked none-the-less.
_________________

Best thread on DDR Freak winnar | Second best thread | Posting and You...