| View previous topic :: View next topic |
| Author |
Message |
Baby Lemonade
Trick Member
Joined: 22 May 2004
Location: Chi-Town |
0.  Posted: Tue Aug 23, 2005 8:24 pm Post subject: Da Bar! (Dimensions of ITG bar) |
 |
|
If there's already something around with machine dimensions... please forgive me.
Anywho, ITG at home requires a makeshift bar (I think). I've tried the couch, the foosball table, assorted chairs, little brothers... you name it. So my question is... what is the standard height of the bar? To me it seems that the ITG bar is a little bit higher than the DDR bar. I'm 6'2" and can't use the bar in DDR worth crap, but they call in SVU when I use it during ITG. So I think I'd be looking for the taller of the two. Thanks! |
|
| Back to top |
|
 |
Cutriss
Staff Member
Joined: 24 Jan 2002
|
| 1. Posted: Wed Aug 24, 2005 5:02 am Post subject: |
|
|
According to the ITG2 manual, the height of the cabinet without the screen is 1.64 meters, and the difference in height between the two is not a whole lot - the cabinet has height that goes below the stopping level of the bar, which stops at the pad, so they look to be nearly the same height (the bar is slightly longer). I'd go with about 1.7 meters.
As for the remaining dimensions, I can't really help you there. I will say though that this should go in the ITG forum, since it really has nothing to do with DDR.
_________________
Sentient Mode is capable... |
|
| Back to top |
|
|
Baby Lemonade
Trick Member
Joined: 22 May 2004
Location: Chi-Town |
| 2. Posted: Wed Aug 24, 2005 9:12 am Post subject: |
|
|
| Well... I figured it had more to do with the comparison of the 2 arcade cabinets, which is why I put it here. Anywho, doesn't matter now, cause that's basically all i was looking for. Thanks. |
|
| Back to top |
|
|
Phantm
Trick Member
Joined: 17 Mar 2005
Location: pennsylvania |
|
| Back to top |
|
|
theinsanitytest
Trick Member
Joined: 02 Jan 2005
|
| 4. Posted: Mon Aug 29, 2005 7:29 pm Post subject: |
|
|
well since this is ITG related and this is the DDR arcade forums and there is a ITG forum on this website, i think any 2 yearold can connect the dots to where this belongs
not to sound like a flamer  |
|
| Back to top |
|
|
JasonTheGreater
Trick Member
Joined: 27 Aug 2005
|
| 5. Posted: Tue Aug 30, 2005 4:33 am Post subject: |
|
|
| Cutriss wrote: | According to the ITG2 manual, the height of the cabinet without the screen is 1.64 meters, and the difference in height between the two is not a whole lot - the cabinet has height that goes below the stopping level of the bar, which stops at the pad, so they look to be nearly the same height (the bar is slightly longer). I'd go with about 1.7 meters.
As for the remaining dimensions, I can't really help you there. I will say though that this should go in the ITG forum, since it really has nothing to do with DDR. |
Eh, I dunno about you, but 1.7 meters doesn't really make a lot of sense. That'd make it over 5 and a half feet, and since that's about my height, I'll tell you right now that the ITG bar doesn't go up to my head.
_________________
|
|
| Back to top |
|
|
'Ivan
Trick Member
Joined: 01 Aug 2004
Location: Thailand |
| 6. Posted: Sat Sep 03, 2005 10:10 pm Post subject: |
|
|
| JasonTheGreater wrote: | | Cutriss wrote: | According to the ITG2 manual, the height of the cabinet without the screen is 1.64 meters, and the difference in height between the two is not a whole lot - the cabinet has height that goes below the stopping level of the bar, which stops at the pad, so they look to be nearly the same height (the bar is slightly longer). I'd go with about 1.7 meters.
As for the remaining dimensions, I can't really help you there. I will say though that this should go in the ITG forum, since it really has nothing to do with DDR. |
Eh, I dunno about you, but 1.7 meters doesn't really make a lot of sense. That'd make it over 5 and a half feet, and since that's about my height, I'll tell you right now that the ITG bar doesn't go up to my head. |
Isn't he talking about the cabinet, not the bar? I...think... 
_________________
If you end up joining, put "ThreeLeafIvy" in the referrer box, will ya?  |
|
| Back to top |
|
|
Kaku
Trick Member
Joined: 22 Jan 2004
Location: Surrey, BC |
| 7. Posted: Sun Sep 04, 2005 11:33 am Post subject: |
|
|
| Some people might be talking about the bar's height from the ground compared to the bar's height from the top of the pads. Maybe that explains why measurements seem off =\ |
|
| Back to top |
|
|
|
Forums FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
