All adaptor questions go here!

[Mark of the DMast]

[thekirai21]

[thekirai21]

Okay, nevermind.

The cord thing was screwy so I used my other one and it worked.
_________________

Whee!

[Mukan]

Ok.. I have a couple questions.

I built a pad (wouldn't exactly call it metal, it has almost no metal) a while back, for Xbox and it works great.. but now I want to use it on Stepmania because I have a much bigger variety of songs there.

I am planning on building a Xbox->USB adapter. The process seems easy enough, only a little cutting, and soldering.

Will this work with my pad?

Also, the original place I read about this said I needed drivers. It linked to a seperate page on the site, but you have to be a member to get the downloads, and becoming a member costs money. Does anyone know what drivers I could use?
_________________

Schupo wrote:

If you're a cock, you're... a cock.

[HBNelson]

Im not sure if this should go in this adaptor thread or the console forum but i was wondering if anyone had experience with ps2 to xbox adaptors. I have a MMB and recently got an xbox for christmas. Any suggestions on how well they work with ddr or if it will even recognize my pad for xbox live?

[josheee]

I finally got my level six parallel adapter today (they had some sort of ordering screw up and didn't send it until the 28th or something).

Anyway.....I plugged it in, got the drivers from http://www.aldostools.com/dpad.html then tried it out with my Cobalt Flux.

The good news is that Stempania at least recognized the Flux as a pad with this adapter.

The bad news is that somehow something is broken, and so some of the buttons were stuck on. When I set it to use the joystick as an input, going through the menus is impossible because it just scrolls through on it's own.

I couldn't map the start and back buttons because whichever ones were stuck (I think Up and or Right) would always map to those keys when I tried it.

I plugged in a regular PS2 controller and had the same problem, so I figured there was either something wrong with the adapter or the driver I used.

I'm running Windows XP and I have a V2 Flux.


Any suggestions? This is my second non-working adapter, and so far I've been unable to play Stepmania with my Flux.

[pecholobo]

I'm using the PS Vibration Feedback Converter and the Logic3 PS Dance Mat with StepMania 3.9 rc2 Windows.

The adapter works fine, except for the fact that I can't press up+down or right+left. I've tried the up+start+select code in various ways but it won't work. I've been told that you can't use that code anymore on the newest versions of StepMania. My converter isn't listed at the StepMania Pad Adapter Compatibility page, so I don't know what else to try.

Does anyone know what else I could try? Thank you very much in advance. =)

[Syphex]

[Evank]

http://www.gamesoftinc.com/PS2.asp


PSX/PS2 Controller to PC 2 Port USB Converter
Use this unique device to connect two (2) of your PSX/PS2 controllers to your PC/Laptop to play your favorite PC games or MAME. Plugs right into the USB Port of your PC. Supports both digital & analog mode. For use with Windows ME/98/2000/XP.

the 11th picture down


will this work for stepmania with a CF pad?

also what does remaping your pad mean?
_________________

-Evan

[CMeyer930]

ok this is pissing me off. I have tried everything i could think of. I tried every port on my computer even and it won't work. So somebody please, think of the child whose beating his comp up. Thanks in advance
_________________

"Look... More sleeping people!!!" ~ Caboose, Red vs. Blue

[=Z06=]

okay, one minor problem...my sister bought me a metal ddr mat from frys today, and apparently its a DB9 Serial Connector (Female), and since my computer is upstairs, i cant play stepmania with it. so now to my question:

Are there any DB9 (Female) to PS2 converters out there??

If so, could you please direct me to the website/store that carries them?

Ill post pictures in a minute.
_________________

Dori Dori.

[Jedo]

are ther any ps to mac
ps2 to mac
or xbox to mac adapter that i can use for stepmania?
_________________

At midnight all the agents and the superhuman crew, go to round up everyone who knows more than they do

[Evank]

[iamjake182]

I just recently bought 2 Ignition V3 pads...I think that's what they are called. I also bought the correct adapter, but when I play the right and down arrows don't always work. They may work at the beginning of the song, but later on they just stop working. Does anyone know what's wrong?

[Evank]

[iamjake182]

Yeah, I tried the code but it didn't fix it.

[Makilaz]

I have a redoctane ps2 to usb adapter (http://redoctane.com/dualusb.html). it worked fine for a long time, but now whenever I connect it, a message comes up saying it has malfunctioned and windows doesn't recognize it. what can I do (besides buy a new one, I don't really want to do that)? screenshot: http://img.photobucket.com/albums/v148/Meowzy/screenshot.jpg
_________________

[lightbulbkid]

hey, I have just recently build myself a metal pad and got the superjoy 10 xobx adapter. The problem is that i took a circuit board out of a soft pad and use this as my controller. But when I play stepmania on fast songs for example (cartoon heros) a few steps into the song my adapter makes that chime that is dissconnected (usb) and will not trigger the steps i am so confused on this, i have the driver for the adapter for ddr, but it still does this, is there a newer driver out there or something any input would be great. Thanks

[jimmyl930]

Can someone recommend an adaptor that will work with both PCs and Macs? Thanks.

[Jedo]

Do u guys think the super dual box would work with macs?
_________________

At midnight all the agents and the superhuman crew, go to round up everyone who knows more than they do