| View previous topic :: View next topic |
| Author |
Message |
Allen Pardy
Basic Member
Joined: 01 Jul 2004
|
0.  Posted: Tue Jul 06, 2004 3:29 pm Post subject: MYMYBOX 6-BUTTON SOLOMODE METAL PAD connector |
 |
|
| Hello everyone! I have a 6-button metal pad ddr. The cable and its 9-pin female connector (D-sub connector) has been pulled off accidentally. Underneath the DDR pad are wires connected from the circuit board to the 9-pin female connector. The point where wires are ripped off is on the 9-pin female connector. All the wires were ripped off on solder points of every pin of the 9-pin female connector. My problem is which wire (color) connects to the corresponding pin number (which is 1 to 9) of the female connector. I know somebody out there knows about this, so I can repair my DDR. Thanks a lot in advance. |
|
| Back to top |
|
 |
xphoguytonyx
Trick Member
Joined: 26 Dec 2003
Location: Haltom City, TX |
|
| Back to top |
|
|
Allen Pardy
Basic Member
Joined: 01 Jul 2004
|
| 2. Posted: Tue Jul 06, 2004 7:20 pm Post subject: |
|
|
| Thanks for the advice, but still no help. |
|
| Back to top |
|
|
xphoguytonyx
Trick Member
Joined: 26 Dec 2003
Location: Haltom City, TX |
| 3. Posted: Tue Jul 06, 2004 9:36 pm Post subject: |
|
|
oops sorry. i ment, u should of still posted in that metal pad sticky so people can answer your question. normally, people will read this thread but dont answer it.
_________________
Site coming sooN....
www.DDRTX.Net
Dont come to my site if u going to spam...
~~~Tony~~~ |
|
| Back to top |
|
|
VxJasonxV
Maniac Member
Joined: 08 Feb 2002
Location: Castle Rock, CO |
| 4. Posted: Wed Jul 07, 2004 12:05 am Post subject: |
|
|
| Cutriss wrote: | | XPHOGUYTONYX YOU ARE NOT A MODERATOR, PLEASE QUIT ACTING LIKE ONE. |
I'm going to leave this open, because I think it'd be nice to have a thread on electronics. It'll be closed and made searchable for future reference as soon as we have a solid answer.
Seeing as this is not a common question, the thread may just die. In the mean time, I'd suggest searching Google for 'Electronics DDR MyMyBox Pad', or some variation on the words and such and see what you can come up with.
_________________
|
|
| Back to top |
|
|
Cutriss
Staff Member
Joined: 24 Jan 2002
|
| 5. Posted: Wed Jul 07, 2004 6:05 am Post subject: |
|
|
I don't know how "openable" your pad is, but are the contacts easy to get to? Do you know anyone else with the same pad? You could just get a multimeter or continuity checker to trace the contacts. I'd offer to help, but I have RO's, and while they're probably of similar circuit design, they're a bit more difficult to take apart. 
_________________
Sentient Mode is capable... |
|
| Back to top |
|
|
Allen Pardy
Basic Member
Joined: 01 Jul 2004
|
| 6. Posted: Wed Jul 07, 2004 7:22 am Post subject: |
|
|
| I thought of that jason and actually that is one of the simplest and practical way I can think of, by opening a similar one. The electronic parts are so accessible that I can easily read the assignment number of every pin and its corresponding wire to it. But I don't know anyone who has the same like mine. I tried searching the google just like what you said Cutriss and I saw a similar one but still not the exact one. I will examine this and see if I can adapt to it. Thanks for you help guys. |
|
| Back to top |
|
|
|
Forums FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
