| View previous topic :: View next topic |
| Author |
Message |
Diet
Trick Member
Joined: 15 Sep 2003
Location: California |
0.  Posted: Tue Sep 16, 2003 2:42 pm Post subject: How do you keep DDR pads working? |
 |
|
| when I go visit another arcade to play Extreme it always seems they have a less, well taken care of machine with sticky arrows on the pads. The machine I play on is not very well taken care of and since it is the only DDR machine around for hours, I want to know how to take care of it.[/img] |
|
| Back to top |
|
 |
Cowman715
Trick Member
Joined: 21 Jan 2003
|
| 1. Posted: Tue Sep 16, 2003 4:13 pm Post subject: |
|
|
Windex and some papertowels somewhat works
_________________
I LOVE FAMILY GUYYYYYYYYYYYY
HE'S SO FUCKING FUNNY WITH THE RANDOMNESS AND MY CAPS PROVE IT TO BE TRUE!!!!!!!! |
|
| Back to top |
|
|
DJX
Trick Member
Joined: 30 Jun 2003
Location: CA |
| 2. Posted: Tue Sep 16, 2003 5:19 pm Post subject: |
|
|
It's not the players, but the operators or arcade managers who have to take care of the machine. Outer cleaning is fairly simple, some Windex or some 409 will work, but cleaning the arrow panels is a bit more complicated...I know the panels come off of the pad, and I'm sure there are instructions that come with the machines.
_________________
|
|
| Back to top |
|
|
Cowman715
Trick Member
Joined: 21 Jan 2003
|
| 3. Posted: Tue Sep 16, 2003 5:21 pm Post subject: |
|
|
Oh sorry... i thought you ment the top of the sensors (slippery, gum on it, ect.)
_________________
I LOVE FAMILY GUYYYYYYYYYYYY
HE'S SO FUCKING FUNNY WITH THE RANDOMNESS AND MY CAPS PROVE IT TO BE TRUE!!!!!!!! |
|
| Back to top |
|
|
-Mystik-
Trick Member
Joined: 16 Jun 2002
Location: NorCal |
| 4. Posted: Wed Sep 17, 2003 12:50 am Post subject: |
|
|
| DJX wrote: | | It's not the players, but the operators or arcade managers who have to take care of the machine. Outer cleaning is fairly simple, some Windex or some 409 will work, but cleaning the arrow panels is a bit more complicated...I know the panels come off of the pad, and I'm sure there are instructions that come with the machines. |
all ya do is unscrew the 4 metal brackets on the corner of each arrow, lift off th emetal brackets and low and behold the arrow will now come off. take it off and clean the inside, go into service mode and do an IO check to make sure all the sensors work etc.... not really that hard, i can replace sensors in about 30 seconds.
_________________
|
|
| Back to top |
|
|
|
Forums FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
