soldering wires to this... monstrosity

[timbudtwo]

I took apart my mad cats pos slip n slide pad to get the controller for my homebuilt metal pad and it is not labeled.... at all ... here are the images. Anyone got any ideas?

http://zcp.netfirms.com/img1.jpg
http://zcp.netfirms.com/img2.jpg
http://zcp.netfirms.com/img3.jpg
http://zcp.netfirms.com/img4.jpg

[Daegon]

here. this -should- be the config. Don't kill me if it's not, cause its not exactly the same as mine, but i'm gonna guess that the wire setup is like this:


to adapt that for your controller, hold it upside down, with the black parts facing you and the cord going off the bottom.

also, you'll have to shave off the black covering on those contacts, and get down to the copper.
_________________

Santa already owns various holidays, he's a very powerful gentleman. I'd be surprised if he -didn't- own Canada by now

[Mouse]

soldering. you gotta be careful when you're doing that. just wanted to remind you not to make any mistakes or you could screw the whole thing up.
_________________

Roll Tide!