View previous topic :: View next topic |
Author |
Message |
feet like ice Trick Member
Joined: 18 Dec 2002
|
40. Posted: Mon Jan 06, 2003 3:22 pm Post subject: |
|
|
weeeeeeeee i got my DX pad today, the foam that came with was bigger than the pad by a little so we had to stuff it in there. Hehe its bigger than me cheap topway ones. It doesnt slide around alot but i think i will put like some wood under it or something. anywayss its a good buy for the price. |
|
Back to top |
|
|
Yuk_fai Trick Member
Joined: 08 Dec 2002 Location: Alberta, Canada |
41. Posted: Mon Jan 06, 2003 3:28 pm Post subject: |
|
|
I Still haven't gotten around to doing my mod, but here are the plans:
1) Obtain Two DDR Dance pads (the cheap, Mad Catz ones), 1/2" plywood, a chair mat for hardwood floors, hard vinyl floor covering, duct tape or packing tape, and a staple gun.
2) Cut plywood into two pieces. Place a dance pad onto each of them.
3) Using a marker, section off eight areas on the chair mat large enough to cover the action buttons (square, X, triangle, O) and two areas that can cover the center area. Cut out the section from the chair mat.
4) Position the pieces of the chair mat onto the pads. Using either packing tape or duct tape, attach the squares onto the pad.
5) Using hard vinyl floor covering, cover up the plywood, dance pad, and pieces of the chair mat. Staple the floor covering onto the plywood.
How does that sound to everyone? I'm worried that the chair mat might cause the sensors to registers when I don't hit them. However, this addition will cause it to feel more "arcady" IMO.
Thanks for your input. |
|
Back to top |
|
|
cRazY FeeT Trick Member
Joined: 25 Dec 2002 Location: SoCal |
42. Posted: Mon Jan 06, 2003 4:01 pm Post subject: |
|
|
i've already tryed the mymybox dx pads from fry's.........they are CRAP!
the arrows started to rip after a few weeks
do u know which gamestop carry the red octane ignitions?
[/quote] |
|
Back to top |
|
|
cRazY FeeT Trick Member
Joined: 25 Dec 2002 Location: SoCal |
43. Posted: Mon Jan 06, 2003 4:02 pm Post subject: |
|
|
poopy double post *edits*
sorry |
|
Back to top |
|
|
Bistander Joe Basic Member
Joined: 06 Jan 2003 Location: Denver |
44. Posted: Mon Jan 06, 2003 4:41 pm Post subject: |
|
|
Could someone post a link to the original Soft Pad Discussion. Thanks. |
|
Back to top |
|
|
feet like ice Trick Member
Joined: 18 Dec 2002
|
45. Posted: Mon Jan 06, 2003 4:46 pm Post subject: |
|
|
|
|
Back to top |
|
|
Ke6dRRtY Trick Member
Joined: 28 Nov 2002 Location: Mesquite, TX |
46. Posted: Mon Jan 06, 2003 5:54 pm Post subject: |
|
|
Original soft pad discussion
I don't know of any specific GameStops that carry the RO Ignition 2.0, just repeating what I've heard. Although Gamestop Online has it, maybe your local store can have one shipped out for you. Just ask them, maybe you'll get lucky. |
|
Back to top |
|
|
cRazY FeeT Trick Member
Joined: 25 Dec 2002 Location: SoCal |
47. Posted: Mon Jan 06, 2003 6:37 pm Post subject: |
|
|
called my local gamestops........they dont carry an dx style pads
only the cheap kinds |
|
Back to top |
|
|
GFBeach Trick Member
Joined: 08 Aug 2002 Location: Georgia USA |
48. Posted: Mon Jan 06, 2003 8:28 pm Post subject: |
|
|
I really can't guess if this mod would cause any mis-firing. It sounds like a good idea for soft pads! The only bit that concerns me is this:
Yuk_fai wrote: | 5) Using hard vinyl floor covering, cover up the plywood, dance pad, and pieces of the chair mat. Staple the floor covering onto the plywood. [/i] |
It looks like you wouldn't have the entire pad surface overed with chairmat plastic, so that'd leave pretty sharp edges along the floor mat squares (I know the side of my chairmat was pretty rigid after being cut, but it's just one big mat piece that fits perfectly inside the giant 'pocket' of the ignition pads). I don't know how sturdy the vinyl floor covering is, but I would think that playing on the pad enough might eventually cause tears or rips where the edges of the floormat meet with the vinyl floor mat. |
|
Back to top |
|
|
wumpus Trick Member
Joined: 09 Nov 2002 Location: Durham, NC |
49. Posted: Tue Jan 07, 2003 9:39 am Post subject: |
|
|
Quote: | Well, I did that chairmat mod that everyone's been talking about. Bought an el-cheapo $17 mat at Officemax, got me a $10 pair of snips from Home Depot, and went to work. This mod works great! I score just about as well on this mod as I do with just removing the cushy insert all together, except my feet don't hurt as much. If the pad still mis-fired, it may have done so for only one step. That's one step out of approximately 2000 when I played a few minutes ago (not exaggerating on the 2000, I did 3 3-song runs on Heavy Mode). It requires a bit of elbow grease to cut the mat, but if you've got some Ignition pads and ~$40 burning a hole in your pocket, this mod is well worth it! |
yayy! Congrats. I'm so glad it worked out for you on Heavy-- as I mentioned earlier we can only do 6-7 foot Standard songs, but the chair mat was working 100% accurately for us at that level.
Keep us advised, if it is still working as well for you a month later (ours is). I spent a long time trying different insert materials before I came up with the chair mat idea, and I really do think it's the "ultimate" insert, short of buying a new Cobalt Flux.. |
|
Back to top |
|
|
GCGee Trick Member
Joined: 08 Nov 2002 Location: High Point |
|
Back to top |
|
|
Ke6dRRtY Trick Member
Joined: 28 Nov 2002 Location: Mesquite, TX |
51. Posted: Tue Jan 07, 2003 3:16 pm Post subject: |
|
|
1. Go into options -> controller settings, and turn controllers 1 and 2 off if you haven't already.
2. Try booting the game without the pads plugged in, then plug them in. Sometimes the pads go wacko when you don't. |
|
Back to top |
|
|
GCGee Trick Member
Joined: 08 Nov 2002 Location: High Point |
52. Posted: Tue Jan 07, 2003 3:41 pm Post subject: |
|
|
Tried both. Nothing. I think it's the pad, since the lights flash when you step on a sensor, and neither is lighting up? Do I need to open my pad? Is there a FAQ that covers this? _________________
Robots are everywhere and they eat old people's medicine for fuel. |
|
Back to top |
|
|
Ke6dRRtY Trick Member
Joined: 28 Nov 2002 Location: Mesquite, TX |
53. Posted: Tue Jan 07, 2003 3:49 pm Post subject: |
|
|
but the other buttons work right? see about getting an exchange since it happened so soon. |
|
Back to top |
|
|
Bluteng3l Trick Member
Joined: 29 Dec 2002 Location: Tennessee |
54. Posted: Tue Jan 07, 2003 4:16 pm Post subject: |
|
|
I got the RedOctane Ignition Pad 2.0 recently. It's a real good pad. The only bad thing is the zipper. When you zip it up for the first time you got to be real careful. Also Redoctane has good customer service. I ordered this bundle that came with 2 pads, 2 pad covers, DDRMax, and a carrying case. When I first got them the zippers broke on both they sent me two new ones pretty fast. So it turned out ok. If you want a review here's a good one.
http://www.ddrseattle.com/IgnitionPad/IgnitionPadReview.html _________________
|
|
Back to top |
|
|
cRazY FeeT Trick Member
Joined: 25 Dec 2002 Location: SoCal |
55. Posted: Tue Jan 07, 2003 5:49 pm Post subject: |
|
|
how do the bns ultra dx pads compare to red octane ignition pad 2.0?
if the red octane pads are much better than theirs ill get them......besides the bns ultra pads are on backorder |
|
Back to top |
|
|
Ke6dRRtY Trick Member
Joined: 28 Nov 2002 Location: Mesquite, TX |
56. Posted: Tue Jan 07, 2003 7:26 pm Post subject: |
|
|
wumpus recently posted a soft pad article in this thread that, among other things, had a direct comparision of the BNS DX and RO Ignition pads, check it out. |
|
Back to top |
|
|
drovkin Basic Member
Joined: 06 Jan 2003
|
57. Posted: Wed Jan 08, 2003 10:15 am Post subject: |
|
|
Is there any other place to get the BNS Ultra DX-Xtreme pad other than http://www.buynshop.com/productinfophp3/VG-DDR-ULTDX ? Because it's sold out, and I was hoping to get it for my birthday, which is the 21st of this month...I tried a google search, but it only pointed me back to the exact same site. If this pad is such a great pad, shouldn't it be sold at least a couple more places? Another reason I wanted to get it at this place was because of the 30 day warranty in case something was wrong when it was shipped...anyway, any other places anyone knows of that might sell these pads? thanks. |
|
Back to top |
|
|
Yuk_fai Trick Member
Joined: 08 Dec 2002 Location: Alberta, Canada |
58. Posted: Wed Jan 08, 2003 10:37 am Post subject: |
|
|
Thanks RyukumuIsora. After hearing your concerns, I'm not sure what I'll do... I might tape the edges of the chair mat so that the corners and edges are rounded...
I think I'll give that a try. I'll post again when it's complete. Hopefully, it'll turn out alright. |
|
Back to top |
|
|
Ke6dRRtY Trick Member
Joined: 28 Nov 2002 Location: Mesquite, TX |
59. Posted: Wed Jan 08, 2003 11:27 am Post subject: |
|
|
Okay people, I'm afraid we've all been had. Check out these pics:
Buy N Shop
MY MY Box
Red Octane
They're all the same frickin pic!!!
edit: fixed the links
Last edited by Ke6dRRtY on Sun Jan 26, 2003 12:35 pm, edited 2 times in total |
|
Back to top |
|
|
|